Black Impact Roller Inlet 0.8m/s Speed Sand Conveyor Belt Machine
TD75 series universal Conveyor Belt Machine is suitable for the occasions of transporting bulk materials or finished products in coal, chemical, water and electricity sectors. The working environment temperature is between 10° to 40°, the conveyed object is below 50°C.
Component of Sand Conveyor Belt Machine
TD75 series universal Conveyor Belt Machine consists of conveyor belt, driving device, idler, frame, tensioning device and so on.
The driving device is the power transmission mechanism of the belt conveyor. TD75 series universal fixed belt conveyor adopts oil-cooled electric drum (referred to as electric drum), which is mainly composed of support, drum body, drive motor, left and right flange shafts, gears, inner gear ring, etc.
The idler is the support device for the conveyor belt and the load of the TD75 series universal Conveyor Belt Machine. The idlers include grooved idlers, flat idlers, self-aligning idlers, etc. The upper idler supporting the heavy section of the conveyor belt adopts a grooved idler; the upper idler of the hand-selected conveyor belt and the lower idler supporting the empty section of the conveyor belt are all flat idlers; in order to prevent and overcome the deviation of the conveyor belt, In the heavy-duty section of the conveyor belt, set up a set of self-aligning idlers or vertical idlers every 10 groups of grooved idlers.
Technical Parameters of Sand Conveyor Belt Machine
| Model | TD75-500 | TD75-650 | TD75-800 | TD75-1000 |
| Product size(mm) | Less than 300 |
| Belt | Width(mm) | 500 | 650 | 800 | 1000 |
| Speed(m/s) | 0.8-2.5 |
| Inclined angle(°) | 0-20 |
| Conveyor length(m) | 20-240 |
| Capacity(t/h) | 78-232 | 110-391 | 130-661 | 230-800 |
| Power(kw) | 3-18.5 | 5.5-37 | 5.5-45 | 7.5-110 |
Selection Conditions of Sand Conveyor Belt Machine
-
Handling capacity:_____
-
Material to be processed: _____
-
Bulk Density: _____t/m3
-
Material temperature: _____℃
-
Water content:____%
-
Material is corrosive or not: ____
-
Material is sticky or not: ____
-
Working environment temperature: ______ ℃
-
Working voltage:____V_____hz_____phase
Precautions for use of Sand Conveyor Belt Machine
The Conveyor Belt Machine needs to be run for idling before use. During the idling test run, attention should be paid to whether there is any deviation of the conveyor belt, the operating temperature of the transmission part, and the flexibility of the idler during operation. At the same time, necessary adjustments should be made, and the load running test can be carried out only after each component is running normally. During the test run with load, the tightness should be adjusted again.
Conveyor Belt Machine should generally be started under no-load conditions. When several belt conveyors are installed in sequence, a lockable starting device should be used to start and stop in a certain order through the centralized control room. In addition, in order to prevent unexpected accidents, each conveyor should also be set with a local start or stop button, which can stop any one individually. The feeding of materials should be uniform and continuous, and overload should be avoided; the frequent starting and braking of the conveyor should be avoided as much as possible during the production process.
Product Tags:
|
|
Black Impact Roller Inlet 0.8m/s Speed Sand Conveyor Belt Machine Images
|
